| Type | D1 | D2 | L1 | SW | Fig. |
|---|---|---|---|---|---|
| 61-12790 | 19.00 | M14x0.75 | 19.50 | 17.00 | 1 |
| 61-16790 | 32.00 | M22x1.50 | 22.50 | - | 1 |
| 61-20790 | 35.00 | M25x1.50 | 24.00 | - | 1 |
| 61-25790 | 42.00 | M32x1.50 | 25.00 | - | 1 |
| 61-32790 | 50.00 | M40x1.50 | 27.50 | - | 1 |
| 61-40790 | 63.00 | M50x1.50 | 30.50 | - | 1 |
| 61-16795 | 25.00 | M20x1.00 | 23.30 | 22.00 | 2 |
| 61-20795 | 30.50 | M24x1.00 | 24.00 | 27.00 | 2 |
| 61-16777 | - | M24x1.00 | 8.10 | - | 3 |
| 61-20777 | - | M28x1.50 | 10.90 | - | 3 |
| 61-25777 | - | M32x1.50 | 12.50 | - | 3 |
| 61-32777 | - | M40x1.50 | 14.00 | - | 3 |
EXA / EXPA / EXF lock nuts (DIN6499)
/
EXA / EXPA / EXF lock nuts (DIN6499)
Adjustable depth stops
Balanced nuts for collets type D
Collet blanks for EDM
Collets type D
Dead length collets type F
Emergency collets type F
Emergency collets type W, B
ESX collets (DIN 6499-B)
EX / EXP / EXM Lock nuts (DIN6499)
EX collets (DIN 6499-A)
EXE / EXPE Lock nuts (DIN6499)
Expanding arbors typ W
Expanding arbors type B
Extended nose collets Type B
Extended nose collets Type W
Feed fingers type A
Ground collet arbor blanks type B
Ground collet arbor blanks type P
Ground collet arbor blanks type W
HSK tool holders
Pull collets type B
Pull collets type B with clamping flats
Pull collets type BCR
Pull collets type HB32 for Hydromat machines
Pull collets type HB32/45 for Hydromat machines
Pull collets type HB45 for Hydromat machines
Pull collets type HW for Hydromat machines
Pull collets type L
Pull collets type P
Pull collets type W
Pull-type collet for BCR
Rubber seals
Sleeve with Morse cone
SRP6 compatible collets for high accurate spindles